 |
Model z05 rigid coupling
Shurjoint
Edcos
|
MODEL Z05 RIGID COUPLING
- Angle-Pad Design -
The Shurjoint Model Z05 is an angle-pad design rigid coupling for moderate pressure piping services including fire mains, long straight runs and valve connections. The angle-pad design allows the coupling housings to slide along the bolt pads when tightened. The result is an offset clamping action which provides a rigid joint which resists so called ‘snaking’ of a long straight run. Support and hanging requirements correspond to ANSI B31.1, B31.9 and NFPA 13. With the removal of only one bolt you can make a fast and easy "swing-over” installation.
The Shurjoint Model Z05 is available with a standard “C”shaped or GapSeal gasket in a variety grades to meet your specific service requirements.
MODEL K-9 RIGID COUPLING
- T&G Design -
The Shurjoint Model K-9 is a T&G (tongue & groove) design coupling for moderate pressure applications where rigidity is required including valve connections, mechanical rooms, fire mains and long straight runs. The built-in teeth and T&G mechanism firmly grasp the pipe ends to eliminate undesired flex. Support and hanging requirements correspond to ANSI B31.1, B31.9 and NFPA 13.
The Model K-9 couplings are comprised of two identical housing segments, EPDM rubber gasket and plated track bolts and nuts. Housing segments are supplied with our standard painted finishes, i.e. orange or RAL3000 red. Optional finishes such as hot dipped zinc galvanized and custom epoxy coatings are available.
MODEL C-7 OUTLET COUPLING
The Model C-7 Outlet Coupling combines the features of a coupling and a reducing outlet. The C-7 is a joining device with an integral reducing outlet, eliminating the need for a mechanical tee or a reducing tee and couplings. The C-7 is available with grooved, male threaded or female threaded outlets. The C-7 coupling is recommended for fire sprinkler services and other applications up to 300 psi (20 Bar) depending on the size and schedule of pipe being used. The C-7 can be used for dry pipe systems or vacuum services up to -10 inHg or 254 mmHg which may occur when the system is drained. All Model C-7 couplings are comprised of an upper and lower ductile iron housings segment, EPDM rubber gasket and plated track bolts & nuts. Housings segments are supplied with our standard painted finishes, i.e. orange or RAL3000 red. Optional finishes such as hot dipped zinc galvanized and custom epoxy coatings are available.
- Angle-Pad Design -
The Shurjoint Model Z05 is an angle-pad design rigid coupling for moderate pressure piping services including fire mains, long straight runs and valve connections. The angle-pad design allows the coupling housings to slide along the bolt pads when tightened. The result is an offset clamping action which provides a rigid joint which resists so called ‘snaking’ of a long straight run. Support and hanging requirements correspond to ANSI B31.1, B31.9 and NFPA 13. With the removal of only one bolt you can make a fast and easy "swing-over” installation.
The Shurjoint Model Z05 is available with a standard “C”shaped or GapSeal gasket in a variety grades to meet your specific service requirements.
 |
Model k-9 rigid coupling
Shurjoint
Edcos
|
MODEL K-9 RIGID COUPLING
- T&G Design -
The Shurjoint Model K-9 is a T&G (tongue & groove) design coupling for moderate pressure applications where rigidity is required including valve connections, mechanical rooms, fire mains and long straight runs. The built-in teeth and T&G mechanism firmly grasp the pipe ends to eliminate undesired flex. Support and hanging requirements correspond to ANSI B31.1, B31.9 and NFPA 13.
The Model K-9 couplings are comprised of two identical housing segments, EPDM rubber gasket and plated track bolts and nuts. Housing segments are supplied with our standard painted finishes, i.e. orange or RAL3000 red. Optional finishes such as hot dipped zinc galvanized and custom epoxy coatings are available.
 |
Model C-7 Outlet
Coupling
Shurjoint
Edcos
|
The Model C-7 Outlet Coupling combines the features of a coupling and a reducing outlet. The C-7 is a joining device with an integral reducing outlet, eliminating the need for a mechanical tee or a reducing tee and couplings. The C-7 is available with grooved, male threaded or female threaded outlets. The C-7 coupling is recommended for fire sprinkler services and other applications up to 300 psi (20 Bar) depending on the size and schedule of pipe being used. The C-7 can be used for dry pipe systems or vacuum services up to -10 inHg or 254 mmHg which may occur when the system is drained. All Model C-7 couplings are comprised of an upper and lower ductile iron housings segment, EPDM rubber gasket and plated track bolts & nuts. Housings segments are supplied with our standard painted finishes, i.e. orange or RAL3000 red. Optional finishes such as hot dipped zinc galvanized and custom epoxy coatings are available.
Coupling
Shurjoint.-
Edcos
Z05 Rigid Coupling
K-9 Lightweight Rigid Coupling
Z07 Heavy Duty Rigid Coupling
Z07N Heavy Duty Rigid Coupling
7771 Standard Rigid Coupling
XH-1000 Extra Heavy Rigid Coupling
7705 Standard Flexible Coupling
7707 Heavy Duty Flexible Coupling
7707N Heavy Duty Flexible Coupling
7707L Large Diameter Coupling
7706 Reducing Coupling
G28 Hinged Lever Coupling
C-7 Outlet Coupling
7706-T Transition Coupling
7771-T Transition Coupling
XH-70EP Extra Heavy Rigid Coupling
7707A HEAVY DUTY FLEXIBLE COUPLING
Edcos.- Distribuidores de equipos, materiales de protección contra Incendios en México y Estados Unidos.
Llama: MX (55) 5368-6929
Call: USA (956) 565-5660 (70) & (956) 513-0469
